masterlogo
 
 

לינקים נוספים
 

חזרה לעמוד הדבקים
חזרה לעמוד Holdtite



esda1


נדרש לקריאת המפרטים
adobe
 
 

 

  טבלת המרה למוצרי- Loctite -  Holdtite  
 

Holdtite - Loctite  Comparison Chart

Holdtite Grade Other Product Reference Available Volume Description
THREADLOCKING
T22 222 / 3222 / 7222 10ml, 50ml, 250ml

SCREWLOK, Low strength for easy disassembly

T43 243 / 3243 / 7243 10ml, 50ml, 250ml

NUTLOK, Medium strength (oil tolerant)

T62 262 / 3262 / 7262 10ml, 50ml, 250ml

STUDLOK, Mid strength lubricated for torque assembly

T72 3272/272/7272 10ml, 50ml, 250ml

STUDLOK, High Strength, HIgh Temperature rated up to 232C

T77 277/ 3277 / 7277 10ml, 50ml, 250ml

STUDLOK, High strength for bolts 25mm and above

T90 290 / 3290 / 7290 10ml, 50ml, 250ml

PENETRATOR, Wicking grade for close fittings parts

RETAINERS
R41 641 / 3641 / 7640 10ml, 50ml, 250ml

BEARING FIT, Medium strength allowing disassembly

R69 609 10ml, 50ml, 250ml

RETAINER Mild Strength, Low viscosity

R60 660 / 3660 / 7609 50ml, 250ml

METAL FILL, To repair and fill worn cylindrical parts

R62 620 / 3620 / 7620 10ml, 50ml, 250ml

RETAINER, High temperature rated up to 232C

R68 680 / 3680 / 7680 10ml, 50ml, 250ml

RETAINER, High strength for dynamic loading

GASKETING
G51 XS51 / 510 / 7510 50ml, 250ml

DURAFORM, High Temperature up to 200C

G55 XS15 / 515 50ml, 250ml, 300ml

DESIGNER GASKET, Form in place, Low viscosity

G58 XS18 / 518 / 7518 50ml, 250ml

DURAFORM SPECIAL GASKET, Form in place, high viscosity

HYB-100 Hylomar 100ml

HYPERSEAL BLUE Automotive, non-hardening gasket

H/TCOPP300 HYLOMAR 310ml

MAXIMUM COPPER High Temperaure RTV Silicone

RTVBLPCAN SAMSONAL 200ml

BLACK HIGH TEMPERATURE Silicone Power Can

THREADSEALING
S54 554 50ml

OPTIMUM HYDRAUIC SEAL

S57 XS67 / 567 / 7567 50ml, 250ml

INSTANT PIPESEAL WITH PTFE, 48 Hr cure time, High temp 200c

S69 3569 / 569 7569 50ml, 250ml

SPECIAL HYDRAULIC, high strength seal on fine threads

S72 572 50ml, 250ml

PIPESEAL WITH TEFLON, long sure time allowing realignment

S77 XS77 / 577 / 7577 50ml, 250ml

GASTITE PIPESEAL, Water, oil, gas AGA Certificate No: 6900

INSTANT BONDING
CA01 416 25gr

CA01 SUPERGLUE, Plastic, rubber, leather, wood etc

CA24 424 25gr

CA24 SUPERGLUE, Elastomers, plastics, fast cure, 1-7 seconds

CA41 CA401/401 25gr

JET SET 41, Wood, paper, leather, rubber

CA44 CA454/454 20gr, 300gr

GEL SET 44, Thick non-drip formula

CA60 CA406/406 25g, 50g

SURE SET 60, Most plastics, steel alumium, 1-5 seconds

CA80 CA408/480/2241 25g

SPECTAK 80, Black, high peel and shock resistant

STRUCTURALS
ST3295/M3295 LT3295 25ml, 50ml

2 PART TOUGHENED ACRYLIC PinkA/GreenB

M5020/M5020B N/A 25ml, 50ml, 400mls

METHACRYLATE Fast cure, Opaque and Black

5060 N/A 400ml

MACROPLEXX Medium and Slow Cure

EPOXY
ADV5 N/A 25ml, 50ml

5 Minute Epoxy

EMPOX Metal Epoxy 25ml

METAL EPOXY

WILSTIK Kneadable N/A 180mm L x 20mm D

Epoxy Putty - Copper, Steel, Aluminium, Aqua and Plastic

SILICONES RTV GASKET MAKER (Dynatex Range)
Dyna Copper RTV Copper MAXX 108gm, 300gr

Advanced formula instant gasket, Sensor Safe Temp up to 371C

Red RTV High Temp Red 108gr, 312gr

Resists oil, anti-freeze, Transmission fluid, Sensor Safe, Temp 343C

Dyna Black RTV Black MAXX 108gr, 312gr

Excellent oil resistance, OEM Spec Sensor Safe, Temp to 329C

Dyna Grey RTV Gray MAXX 108gr

For imported cars, Sensor Safe, OEM Spec, Temp to 329C

POLYURATHANES
128 225 310ml

Black, Windscreen/Direct Glazing/Sealant Neutral Cure

132 291 310ml

Black, White Structural and Marine

DP2246 221, 11FC 310ml

Grey, Black, White, Structural and Marine

133 252 310ml

Grey, Black, White, Structural and Marine

SURFACE PREPARATION
A471 7471(T)/9190 200ml

Structural activator for Anaerobics

A649 7649 50ml

Structural activator for Anaerobics

A701 7701/770/9050 50ml

Primer for Polyoefin's/Cyanoacrylates

A113 255 200ml

Post assembly activator

GASKET REMOVER 790 369g

Gasket Remover

LUBRICANTS
Power Can/Brush Top N/A 200g

Aluminium, Nickel and Copper

AA 500g 767 500g

Screw Top/Brush Aluminium Antiseize

NA 500gr 771 500g

Screw Top/Brush Nickel Antiseize

CA 500g C5A 500g

Screw Top/Brush Copper Graphite Antiseize


 
     

 
אקסדרון בע"מ,  טלפון: 08-9466211, פקס: 08-9318501, אימייל:  office@exdron.com

דף הבית  | צור קשר  | אודותינו  | FAQs שאלות ותשובות

Copyright © 2005. Exdron. All rights reserved
למען הסר כל ספק, אקסדרון אינה נציגה בלעדית או רשמית בארץ של מי מהיצרנים ו/או המותגים המופיעים באתר אקסדרון היא יבואנית בייבוא מקביל של המותגים הנ"ל
Please note, Exdron is not an official distributor or representative of manufacturers in this website, Exdron is a dealer doing purchasing services to companies in Israel.